3/8 Inch Ratio 3:1 Waterproof Double Wall Heat-Shrinkable Tube with Adhesive,Thickening Heat Shrinkable Casing,Marine Heat Shrink Tube,Black

#ad
Super Cloud-RIOCAN #ad - Inner diameter:3/8 inch length:4 feet Weight:26g Size:6*6*2. 2cm note: the product package does not include the terminal of picture 2 and picture 3. Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing.

No need to remove the connector to facilitate the repair of damaged insulating layer. Please contact us promptly if you have any questions.

#ad



5 Feet 1/2 Inch Heat Shrink Tubing 3:1 Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY by Purple-fox Black Dia12.7mm 1/2"

#ad
Purple-fox #ad - Don't touch the tube until it becomes cool. Wire ends, electronics protection and insulation treatment. 2. How to use it? 1. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly. Note: make sure temperature of your heat gun is up to 212℉Fahrenheit, group of lines marking, they can be used for solder joint protection, then glue inside will soften and seal the connection.

Great advantages : our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, tough, good sealing, corrosion resistance and high temperature resistance. Fitness equipment parts and steel structure surface protection and so on. First choose the right size tubes, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter.

5 Feet 1/2 Inch Heat Shrink Tubing 3:1 Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY by Purple-fox Black Dia12.7mm 1/2" #ad - Feature: adhesive lined heat shrink tubing Sleeving Material: polyolefin Main color: black Ratio: 3:1; Round diameter: 12. 7mm 1/2" shrink temperature: 80C; Fit for: appliance/Auto wire harness Each Length: 1. 5m/ 5ft; temperature range: -55c to +125c rated voltage:600V Beginning shrinking temperature:80C, Completely shrinking temperature: 120C package content: 1 x heat shrink tubing1.

5m length/5ft  advantage: tough flame-retardant polyolefin tubing lined withal flame-retardant adhesive provides the optimum solution for applications where full flame retardant is preferred. Anti-aging, not easy to break.

#ad



XHF 1/2 Inch 13mm 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black

#ad
XHF #ad - We strive to ensure that every customer is satisfied with our products. Safety and environmental protection: purple-fox heat-shrinkable tubes are UL and CSA certified, free of formaldehyde HCHO, RoHS compliant, heavy metals and other harmful substances protecting you and your family from toxins. Versatile and diy helper: high-quality heat shrink tubing, resistance electric capacity reason protection etc.

Our products: the main function is waterproof, anti-corrosion, anti-leakage and multi-strand wire harness. Fitness equipment parts and steel structure surface protection and so on. Safety and environmental protection xhf dual wall shrink tube are ul and csa certified, free of formaldehyde HCHO, RoHS compliant, 3/0, heavy metals and other harmful substances.

XHF 1/2 Inch 13mm 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black #ad - Note: make sure temperature of your heat gun is up to 212℉Fahrenheit, group of lines marking, they can be used for solder joint protection, then glue inside will soften and seal the connection. Great advantages : our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, tough, good sealing, corrosion resistance and high temperature resistance.

. Occasion. Wire ends, fitness equipment parts and steel structure surface protection and so on. The rubber liner has good sealing performance XHF heat-shrinkable tube has the advantages of good electrical insulation, tough, good sealing, corrosion resistance and high temperature resistance.

#ad



1/2 inch Ratio 3:1 Waterproof Double Wall Heat-Shrinkable Tube with Adhesive,Thickening Heat Shrinkable Casing,Marine Heat Shrink Tube,Black

#ad
RIOCAN #ad - Wire ends, electronics protection and insulation treatment. Anti-aging, not easy to break. Easy and fast: it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one. Widely applications: heat-shrinkable tubes are mainly used for wire links, anti-rust and anti-corrosion protection of solder joints, harnesses, and audio and electrical DIY.

Fitness equipment parts and steel structure surface protection and so on. Safety and environmental protection xhf dual wall shrink tube are ul and csa certified, 3/0, RoHS compliant, free of formaldehyde HCHO, heavy metals and other harmful substances. There are 13 sizes: 12. 7mm 13mm, 50mm. Containing glue, waterproof, and double wall.

1/2 inch Ratio 3:1 Waterproof Double Wall Heat-Shrinkable Tube with Adhesive,Thickening Heat Shrinkable Casing,Marine Heat Shrink Tube,Black #ad - With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing. No need to remove the connector to facilitate the repair of damaged insulating layer. Please contact us promptly if you have any questions. Safety and environmental protection: purple-fox heat-shrinkable tubes are UL and CSA certified, RoHS compliant, free of formaldehyde HCHO, heavy metals and other harmful substances protecting you and your family from toxins.

Versatile and diy helper: high-quality heat shrink tubing, resistance electric capacity reason protection etc.

#ad



3/8 inch Ratio 3:1 Waterproof Double Wall Heat-Shrinkable Tube with Adhesive,Thickening Heat Shrinkable Casing,Marine Heat Shrink Tube,Red

#ad
RIOCAN #ad - Anti-aging, not easy to break. Easy and fast: it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one. Widely applications: heat-shrinkable tubes are mainly used for wire links, anti-rust and anti-corrosion protection of solder joints, harnesses, and audio and electrical DIY.

Wire ends, electronics protection and insulation treatment. There are 13 sizes: 12. 7mm 13mm, 50mm. Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing. No need to remove the connector to facilitate the repair of damaged insulating layer.

3/8 inch Ratio 3:1 Waterproof Double Wall Heat-Shrinkable Tube with Adhesive,Thickening Heat Shrinkable Casing,Marine Heat Shrink Tube,Red #ad - Please contact us promptly if you have any questions. Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing. No need to remove the connector to facilitate the repair of damaged insulating layer. Please contact us promptly if you have any questions.

#ad



Black - Dual Wall Adhesive Marine Heat Shrink - 1/2 Inch Diameter - 10 Ft Roll

#ad
HuBB Hardware SES008 #ad - Note: make sure temperature of your heat gun is up to 212℉Fahrenheit, they can be used for solder joint protection, group of lines marking, then glue inside will soften and seal the connection. Great advantages : our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, good sealing, tough, corrosion resistance and high temperature resistance.

There are 13 sizes: 12. 7mm 13mm, 50mm. Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing. No need to remove the connector to facilitate the repair of damaged insulating layer. Please contact us promptly if you have any questions.

Black - Dual Wall Adhesive Marine Heat Shrink - 1/2 Inch Diameter - 10 Ft Roll #ad - Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing. No need to remove the connector to facilitate the repair of damaged insulating layer. Please contact us promptly if you have any questions. Top -pro-quality 1/2" heat shrink tubing in a 10 foot roll.

#ad



TEMCo 1/2" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft BLACK

#ad
TEMCo ST0290 #ad - Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction.

Anti-aging, not easy to break. Easy and fast: it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one. Widely applications: heat-shrinkable tubes are mainly used for wire links, harnesses, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY.

TEMCo 1/2" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft BLACK #ad - Wire ends, electronics protection and insulation treatment. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Don't worry about it hurting your body and environment. Applicable to 1/0, 2/0, 4/0 AWG cable electrical projects.

A wide range of applications shrink tube are mainly used for industrial, wire links, ship, electronics protection and insulation treatment, harnesses, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Electrical applications. 3:1 heat shrink ratio.

#ad



2 Pack 1/2 inch Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK 4 Feet, Black & Red

#ad
MILAPEAK #ad - Electrical applications. 3:1 heat shrink ratio. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a hair dryer or heat gun heating it. What you get - 4 ft long black 1/2"dia 3:1 dual wall heat shrink tubing and 4 ft long Red 1/2"DIA 3:1 Dual Wall Heat Shrink Tubing, our worry-free 12-month and friendly customer service.

Specification: - color: black and red - diameter: 1/2 inch - length: 4 feet - material: polyolefin - heat shrink ratio: 3:1 - Operating Temperature:-55°C to + 125°C - Minimum Shrinkage Temp: 70°C - Full Shrinkage Temp: 110°C maximum - Tensile strength: 104mpa - dielectric strength: 15 kv / mm - flammability: flame retardant package contents - 4 ft 1/2" black dual-wall 3:1 adhesive lined heat Shrink Tubing - 4 ft 1/2" Red Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing Safety and environmental protection: purple-fox heat-shrinkable tubes are UL and CSA certified, free of formaldehyde HCHO, RoHS compliant, heavy metals and other harmful substances protecting you and your family from toxins.

2 Pack 1/2 inch Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK 4 Feet, Black & Red #ad - Versatile and diy helper: high-quality heat shrink tubing, resistance electric capacity reason protection etc. Wire ends, fitness equipment parts and steel structure surface protection and so on. The rubber liner has good sealing performance XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, tough, corrosion resistance and high temperature resistance.

Anti-aging, not easy to break. Note the size of the advertisement description is the size before shrinking, and it is the diameter of the heat shrinkable tube in a circular state. Multiple size colors we have three different colors: black, 19.

#ad



3/4 inch 19mm 3:1 Dual Wall Adhesive Heat Shrink Tubing, Large Diameter Glue Lined Marine Cable Sleeve Tube, Premium Wire Wrap Protector for DIY by MILAPEAK 4 Feet, Black

#ad
MILAPEAK #ad - They are also rohs compliant, Formaldehyde HCHO Free, protect you and your famaily from toxins. Good tightness with glue lined】- our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection.

Especially the heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Fast & easy use: are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Milapeak 3/4" 3:1 dual wall adhesive lined Heat Shrink Tubing - Best for appliance/auto electric wire cable harness wrapping, solder joint protection etc.

3/4 inch 19mm 3:1 Dual Wall Adhesive Heat Shrink Tubing, Large Diameter Glue Lined Marine Cable Sleeve Tube, Premium Wire Wrap Protector for DIY by MILAPEAK 4 Feet, Black #ad - . Specification: - color: black - diameter: 3/4 inch - length: 4 feet - material: polyolefin - heat shrink ratio: 3:1 - Operating Temperature:-55°C to + 125°C - Minimum Shrinkage Temp: 70°C - Full Shrinkage Temp: 110°C maximum - Tensile strength: 104mpa - dielectric strength: 15 kv / mm - flammability: flame retardant package contents - 4 ft 3/4" dual-wall 3:1 Adhesive Lined Heat Shrink Tubing Safety and environmental protection: purple-fox heat-shrinkable tubes are UL and CSA certified, free of formaldehyde HCHO, RoHS compliant, heavy metals and other harmful substances protecting you and your family from toxins.

Versatile and diy helper: high-quality heat shrink tubing, resistance electric capacity reason protection etc. Round diameter: 1/2'', Length: 1. 22m4ft.

#ad



1/4" Heat Shrink Tubing, 50 pcs, 4" Long, High Voltage & Temperature Rating

#ad
KASSupply #ad - Note: make sure temperature of your heat gun is up to 212℉Fahrenheit, which will be exposed to harsh environments. There are 13 sizes: 12. 7mm 13mm, 50mm. Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing.

No need to remove the connector to facilitate the repair of damaged insulating layer. Please contact us promptly if you have any questions. Containing glue, waterproof, and double wall. With a 3:1 high contraction ratio. Excellent hot melt adhesive and high shrinkage ratio provide excellent sealing. No need to remove the connector to facilitate the repair of damaged insulating layer.

1/4" Heat Shrink Tubing, 50 pcs, 4" Long, High Voltage & Temperature Rating #ad - Please contact us promptly if you have any questions. Top -pro-quality 1/2" heat shrink tubing in a 10 foot roll. Heat activated adhesive lining provides impermeable seal to salt water and other liquids. Ideal for marine, auto, Hobby, and numerous Misc. Anti-aging, not easy to break. Easy and fast: it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one.

#ad



5 Ft 3/4 inch Heat Shrink Tubing 3:1 Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY by Purple-fox Black Dia19.1mm 3/4"

#ad
Purple-fox #ad - Don't touch the tube until it becomes cool. Safety and environmental protection: purple-fox heat-shrinkable tubes are UL and CSA certified, RoHS compliant, free of formaldehyde HCHO, heavy metals and other harmful substances protecting you and your family from toxins. Versatile and diy helper: high-quality heat shrink tubing, resistance electric capacity reason protection etc.

It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a hair dryer or heat gun heating it. What you get】- 4 ft 3/4" 3:1 dual wall heat shrink tubes, also available DIA: 1/2" and 1" dual wall heat shrink tubing in our store. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly.

5 Ft 3/4 inch Heat Shrink Tubing 3:1 Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY by Purple-fox Black Dia19.1mm 3/4" #ad - They can be also used for solder joint protection, group of lines marking, then glue inside will soften and seal the connection. Safe & eco-friendly】- our heat shrink tubes are both ul & csa certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also rohS Compliant, protect you and your famaily from toxins.

Electrical applications. 3:1 heat shrink ratio. Ul listed & rohs compliant black color shrink tubing.

#ad