Lisle 36200 Valve Keeper Remover and Installer

#ad
Lisle 36200 #ad - Lisle 36200 Valve Keeper Remover and Installer #ad - Can be used on the car or a work bench. To install keepers, load keepers into the installer. Can be used on the car or a work bench. Comes in skin-pack. A magnet in the tool body captures the keepers for quick removal and valve disassembly. Push or tap to install. Quickly removes valve keepers on overhead valve engines.

Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers.

#ad



Lisle 19700 Valve Holder

#ad
Lisle 19700 #ad - Air pressure helps prevent the valve from falling into the combustion chamber. For both 14 millimeter and 18 millimeter Spark Plug Threads. Thread fitting to spark plug hole and other end to air supply. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply. Commonly used when valve springs or valve stem seals are replaced.

Lisle 19700 Valve Holder #ad - Comes with two-step fitting for both 14 millimeter and 18 millimeter threads.

#ad



Supertech Honda / Acura B-Series VTEC Valve Stem Seal Kit

#ad
Supertech VS-H5.5I/H5.5E #ad - Thread fitting to spark plug hole and other end to air supply. Air pressure helps prevent the valve from falling into the combustion chamber. Comes with two-step fitting for both 14 millimeter and 18 millimeter threads. Supertech. B-series vtec b16 b18c dohc 16 piece, 8 intake, 8 exhaust Exhaust and Intake Commonly used when valve springs or valve stem seals are replaced.

Supertech Honda / Acura B-Series VTEC Valve Stem Seal Kit #ad - . Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.

#ad



Permatex 80037 Valve Grinding Compound, 3 oz.

#ad
Permatex 80037 #ad - Supertech. This compound mixes with water to form an easy-to-use paste and can be used for lapping and grinding chromium. Commonly used when valve springs or valve stem seals are replaced. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply. Aids valve grinding and seating operations.

Permatex 80037 Valve Grinding Compound, 3 oz. #ad - Air pressure helps prevent the valve from falling into the combustion chamber. Removes burrs, carbon, surface defects, gum and corrosion. Suggested applications: Seat valves, sharpen reel type lawn mowers. Comes with two-step fitting for both 14 millimeter and 18 millimeter threads. Can be used for lapping and grinding chromium.

Thread fitting to spark plug hole and other end to air supply. Mixes with water to form an easy-to-use paste. Permatex valve grinding compound aids valve grinding and seating operations to remove burrs, carbon, surface defects, gum and corrosion.

#ad



Permatex 81950 Ultra Slick Engine Assembly Lube, 4 oz., 4 Ounce

#ad
Permatex 81950 #ad - Removes burrs, surface defects, carbon, gum and corrosion. Suggested applications: Seat valves, sharpen reel type lawn mowers. Comes with two-step fitting for both 14 millimeter and 18 millimeter threads. This high quality formulation meets or exceeds OEM performance specs for engine assembly lubricants. Permatex ultra slick engine Assemly Lube adheres to component surfaces to prevent scuffing and galling during initial start-up.

Mixes with water to form an easy-to-use paste. Aids valve grinding and seating operations. Can be used for lapping and grinding chromium. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply. Commonly used when valve springs or valve stem seals are replaced. Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine.

Permatex 81950 Ultra Slick Engine Assembly Lube, 4 oz., 4 Ounce #ad - From special-mission, job-specific lubricants, to the rigors of heavy-duty needs, protectants and dressings, count on Permatex to bring you reliability and problem-solving solutions that extend the life of your equipment. Air pressure helps prevent the valve from falling into the combustion chamber. High quality formulation meets OEM performance specs for engine assembly lubricants.

. Thread fitting to spark plug hole and other end to air supply.

#ad



Lisle 36050 Valve Keeper Remover and Installer Kit

#ad
Lisle 36050 #ad - Adheres to component surfaces to prevent scuffing and galling during initial start-up. Can be used on the car or bench. To install keepers, load in retainer on valve stem, then push or tap handle to install. High quality formulation meets OEM performance specs for engine assembly lubricants. Removes burrs, carbon, surface defects, gum and corrosion.

Suggested applications: Seat valves, sharpen reel type lawn mowers. Suggested applications: Engine bearings, valves, lifters, camshafts, guides and rocker shaft assemblies. Quickly removes and installs valve keepers on most overhead valve engines with valve stems from 4. 5 to 7. 5mm and 5/16 inches to 3/8 inches.

Lisle 36050 Valve Keeper Remover and Installer Kit #ad - Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly. Commonly used when valve springs or valve stem seals are replaced. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.

Air pressure helps prevent the valve from falling into the combustion chamber. New smaller size works on Toyota four cylinder and Chrysler New World Engine applications.

#ad



OEMTOOLS 25349 Offset Feeler Gauge with 16-Blade

#ad
Great Neck Saw 25349 #ad - 2 piece design for added strength. Adheres to component surfaces to prevent scuffing and galling during initial start-up. Perfect for measuring gap widths and more. 16 hardened tempered steel blades. Suggested applications: Engine bearings, valves, camshafts, lifters, guides and rocker shaft assemblies. Quickly removes and installs valve keepers on most overhead valve engines with valve stems from 4.

5 to 7. 5mm and 5/16 inches to 3/8 inches. Blade protector has a thumb notch to aid in removal of blades. Comes with two-step fitting for both 14 millimeter and 18 millimeter threads. This feeler gauge also features a thumb notch for easy blade removal. Supertech. High quality formulation meets OEM performance specs for engine assembly lubricants.

OEMTOOLS 25349 Offset Feeler Gauge with 16-Blade #ad - Commonly used when valve springs or valve stem seals are replaced. Can be used for lapping and grinding chromium. Each blade has been laser etched with SAE and Metric sizes and constructed by hardened, tempered steel. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply. Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine.

#ad



Abn Valve Hand Lapping Grinding Tool Kit 2-Piece Set - Dual-End Suction Cup Lap Stick, 1-1/8, 1-3/8, 5/8, 3/16 Inch

#ad
ABN 8542038630 #ad - Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. Commonly used when valve springs or valve stem seals are replaced. Suggested applications: Engine bearings, valves, lifters, camshafts, guides and rocker shaft assemblies.

Quickly removes and installs valve keepers on most overhead valve engines with valve stems from 4. 5 to 7. 5mm and 5/16 inches to 3/8 inches. To properly recondition the valve seat and valve during an engine top-end rebuild, use the ABN Valve Hand Lapping Grinding Tool Kit 2-Piece Set - Dual-End Suction Cup Lap Stick Pack.

Abn Valve Hand Lapping Grinding Tool Kit 2-Piece Set - Dual-End Suction Cup Lap Stick, 1-1/8, 1-3/8, 5/8, 3/16 Inch #ad - Clean the application surface, press the correct size suction cup firmly onto the head of the valve, install the valve in the valve guide, and lightly spin the tool handle between the palms of your hand as if trying to start a fire until a suitable finish is obtained. Removes burrs, carbon, surface defects, gum and corrosion.

Suggested applications: Seat valves, sharpen reel type lawn mowers. Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. 16 hardened tempered steel blades. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply. Aids valve grinding and seating operations.

#ad



Supercrazy Double Ended Grip Valve Grinding Lapping Stick Tool Set 5/8" 13/16" 1-1/8" 1-3/8" SF0226

#ad
SUPER TOOLS #ad - Easy to use: clean all carbon deposits off valve and wipe down each valve, install valve in valve guide, press correct size suction cup firmly onto head of valve, and lightly spin tool handle between palms of your hand as if trying to start a fire until a suitable finish is obtained; We recommend placing valve lapping/grinding compound not included on valve seat or valve surface keep compound off the top surface of the valve to ensure proper suction.

Package contents: package includes 2 valve lapper tools with dual ends for your convenience - Large 1-1/8-inch and 1-3/8-inch, Small 5/8-inch and 3/16-inch; Lapping/grinding compound not included. Thread fitting to spark plug hole and other end to air supply. Air pressure helps prevent the valve from falling into the combustion chamber.

Supercrazy Double Ended Grip Valve Grinding Lapping Stick Tool Set 5/8" 13/16" 1-1/8" 1-3/8" SF0226 #ad - Accurately seat valves: the valve hand lapping grinding tool kit 2-piece set - dual-end suction cup lap stick, flat surface of a lawn mower, 20mm, 5/8", chainsaw, 3/16" inch helps you properly match valve seats during an engine top-end rebuild; These tools include dual ends with oil and UV-resistant synthetic rubber cups that help you put the finishing touches on your tune-up VARIOUS APPLICATIONS: Suitable for any clean, 1-1/8", and 1-3/8-inch 16mm, 1-1/18-inch, 29mm, 1-3/8", 13/16-inch, or small or large engine car or other vehicle with 5/8-inch, 35mm valves; 9-inch and 8-inch 22.

5cm and 21cm overall lengths make these tools useful for even installing and removing recessed fixtures or hard-to-reach mini-flood light bulbs. Blade protector has a thumb notch to aid in removal of blades. Grip comfortably: 07-inch 17mm long handles for ultimate control, less user fatigue, and more productivity; 0

#ad



ORIGINAL Spring Compressor Tool for Honda F20C / F22C1 engines

#ad
Euroexport #ad - These tools include dual ends with oil and UV-resistant synthetic rubber cups that help you put the finishing touches on your tune-up. 6. 75 inch 17. 1cm long easy-grip handle for better control, less user fatigue, and more productivity. Measures: 0005 inch to 0020 inch 0127 - 0508 mm. May need some modification to work on F20/F22 heads.

Can be used for lapping and grinding chromium. The body is anodized red cNCed 6061 T6 aluminum, for a gorgeous finish and excellent durability. Comes with two-step fitting for both 14 millimeter and 18 millimeter threads. Suggested applications: Engine bearings, camshafts, valves, lifters, guides and rocker shaft assemblies.

ORIGINAL Spring Compressor Tool for Honda F20C / F22C1 engines #ad - Quickly removes and installs valve keepers on most overhead valve engines with valve stems from 4. 5 to 7. 5mm and 5/16 inches to 3/8 inches. All bolts are zinc plated for corrosion resistance and improved longevity. Aids valve grinding and seating operations. Supertech. The body is anodized red CNC machined 6061 T6 aluminum, for excellent finish and durability.

#ad



Lisle 33500 Piston Ring Installer

#ad
Lisle 33500 #ad - Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Oil and uV-resistant synthetic rubber cups. Sizes】1-1/8 inch, 1-3/8 inch and 1-1/16 inch, 1-5/16 inch. Eliminate broken rings and piston damage by removing and replacing rings with these specially designed pliers.

Makes valve component disassembly and reassembly fast and easy. Magnet in tool body captures keepers for quick removal and valve disassembly. Can be used on the car or bench. New smaller size works on Toyota four cylinder and Chrysler New World Engine applications. Etched sae and Metic size indicators. Chamfered drive end for quick attachment.

Lisle 33500 Piston Ring Installer #ad - Skin-packed. Commonly used when valve springs or valve stem seals are replaced. S-2 steel for strength and durability. Applicable】double ended grip valve grinding lapping stick tool set helps you properly match valve seats during an engine top-end rebuild. Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.

Tapered jaws to remove and install most passenger car and light truck rings from 3/64" to 1/4" 1. 2 - 6.

#ad