Top 10 Oil Lamp Replacement Parts – Oil Lamps

As an Amazon Associate I earn from qualifying purchases.

1. Light Of Mine


Light Of Mine Oil Lamp Replacement Burner | #2 Brass Plated Burner | Oil Lamp Replacement Parts | Burner | Reduction Ring & Replacement Wick for Antique Hurricane Lamps 1

Light Of Mine #ad - This burner is durable with a 1 3/16" diameter threaded base. Intended for chimneys with 3" Diameter | Bring Back to life your early antique lamps with these replacement burners.

Unbranded wheel turns Nice and Smooth with adjustable prongs to secure your globe. High quality and high thread count ready to burn. Light of mine offers a 100% money Back Guarantee on the purchased price if you are not completely satisfied. Unlike other lesser quality burners, these come with 7 1/2" wick not just there for decoration. High quality #2 brass plated Oil Lamp Replacement Burner is a perfect replacement for your oil lamp.
BrandLight Of Mine #ad
ManufacturerChina #ad

2. B&P Lamp


Brass, B&P Lamp #2 Kerosene Lamp Burner

B&P Lamp #ad - Functional burner fits many lamps and has a 1 3/16 inch diameter threaded base. Comes with a wick and removable screw-on collar. Brass plated #2 oil burner is a perfect replacement for an oil lamp. Designed to hold a chimney with a 3 inch wide base. Burner has a fine threaded base designed to fit early American oil lamps without replacing the collar.
BrandB&P Lamp #ad
ManufacturerB&P Lamp #ad
Part Number12621



Oil LAMP Burner/Chimney Holders Lamplight Farms Style M999 LOT of 5 New!

LAMP OIL #ad - 2 threads and is 1-3/4" inside diameter. The bottom collar can also unscrew if needed see last picture above and when you take off that collar you have male threads 1-3/16" in diameter. These brand new oil lamp burners feature bright brass plated finish, 3/4" wide cotton wick and adjusting knob on the side. These burners also feature a side knob to raise or lower the wick to desired level. The mounting collar fits standard No. These burners hold standard 3" diameter bottom fitter glass chimneys. Set of 5.
BrandLAMP OIL #ad
ManufacturerLamp Oil #ad
Height5 Inches
Length6 Inches
Weight0.75 Pounds
Width4 Inches
Part NumberLamp Oil

4. Lamplight


Flaretop, Lamplight Replacement Oil Lamp Chimney Oil Lamp

Lamplight #ad - Size: 8. 5” h. Best results use with Lamplight Ultra-Pure or Medallion Lamp Oil. For oil lamp use only. 3” bottom opening fits most large size oil lamps.
BrandLamplight #ad
ManufacturerLamplight #ad
Height8.5 Inches
Length4 Inches
Weight2.5 Pounds
Width4 Inches
Part Number417B

5. Lamplight


Lamplight Chamber Oil Lamp

Lamplight #ad - Household necessity during power outages. Holds 12 -ounce of fuel. Burns for up to 25 hours. Included one burner and one chimney.
BrandLamplight #ad
ManufacturerLamplight #ad
Height12 Inches
Length4.69 Inches
Weight0.39 Pounds
Width4.69 Inches
Part Number110

6. B&P Lamp


B&P Lamp #2 Kerosene Lamp Burner and 3" by 8 1/2" Crimped Top Chimney

B&P Lamp #ad - New #2 brass plated oil burner and Crimped Top Chimney is a perfect replacement for an oil lamp. Unlike some other cheaper burners, this burner has a fine threaded base designed to fit early American oil lamps without replacing the collar. Comes with 7 inch wick and removable screw-on collar. This well made, functional burner fits many lamps and has a 1 3/16" diameter threaded base. Burners designed to hold a chimney with a 3" wide base.
BrandB&P Lamp #ad
ManufacturerB&P Lamp #ad
Part Number1262140C

7. Oil Lamp Mate


Oil Lamp Mate 3/4" Inch Flat Cotton Oil Lantern or Oil Lamp Wick with Purple Stitch. 6 Foot Roll

Oil Lamp Mate #ad - Purple center stitch. Perfect for flat Wick Oil Lamps and Oil Lanterns. Cut as your wish. Highest quality flat cotton wick. 3/4" inch wide, 6 foot roll, 100% cotton.
BrandOil Lamp Mate #ad
ManufacturerOil Lamp Mate #ad
Height0.87 Inches
Length2.56 Inches
Width2.56 Inches
Part NumberB014F4LNCA

8. Glo-Brite


Glo Brite by 21st Century L25P Standard Brass Lamp Burner

Glo-Brite #ad - Fits 3-inch chimney base. Made of long lasting brass plated steel. 3-inch standard lamp burner. Note: burner is designed to fit lamp base with 1 5/16” Outer Diameter, when collar is removed, burner will fit lamp base with 1 3/16” Inner Diameter.
BrandGlo-Brite #ad
ManufacturerV&O #ad
Height7.25 Inches
Length2.5 Inches
Weight0.2 Pounds
Width4.25 Inches
Part NumberL25P

9. B&P Lamp


B&P Lamp #2 Queen Anne Burner w/Antique Brass Finish

B&P Lamp #ad - Solid brass antique brass finish. Screws into a metal collar with 1-3/16" inside diameter opening standard american#2 thread size - accepts 3" base chimneys57936c, 57956, 57964, 57967i, 57944, 57953, 57954, 57966i, 57932, 57946, 57972, 57940and others with 3" basesAlso Fits:. Ball shade holders:10780, 10790 Tripods12713, 12719. Shade ring holders:10722, 10734.
BrandB&P Lamp #ad
ManufacturerB&P Lamp #ad
Part NumberB&P-6346

10. B&P Lamp Supply


B&P Lamp Solid Brass Queen Anne Burner

B&P Lamp Supply #ad - Has 1 3/16" threaded base to fit all #2 collars and comes with a 6" wick. Accepts a 3" base chimney. 2 size queen Anne burner. This fine replica of an antique oil burner has all of the original style and quality of the popular, old Queen Anne. Brass: bright dipped & lacquered.
BrandB&P Lamp Supply #ad
ManufacturerB&P Lamp Supply #ad
Part Number10622